Details about Custom Stainless Steel Anti-Drone Rope Netting Manufacturer
Product Details
Size & Application
How to order
Video
Product Details
Custom Stainless Steel Anti-Drone Rope Netting Manufacturer
Boni Tech is a direct stainless steel anti-drone rope netting manufacturer. We engineer each order to your drawing — custom rope diameter, aperture, panel size, mesh type, edge finish and mounting hardware. Our factory in Hebei ships rope mesh panels to drone protection installers and security contractors worldwide.
Custom Rope Netting — What We Engineer for Each Order
- Material grades: AISI 304 / 316 / 316L stainless steel (A2 / A4 marine grade on request).
- Wire rope construction: 7 × 7 strand (for Ø 1.2 – 2.0 mm) or 7 × 19 strand (for Ø 2.4 – 4.0 mm).
- Rope diameter: 1.2 mm / 1.6 mm / 2.0 mm / 2.4 mm / 3.0 mm standard; custom up to 4.0 mm.
- Aperture: 30 × 30 mm to 150 × 150 mm (custom up to 200 mm).
- Mesh type: Ferrule (interlaced) / cross-clamp (pressed) / knotted.
- Panel size: Up to 3 m × 12 m per single panel; larger by splicing.
- Mounting hardware: Stainless eyelets, boundary ropes, tension rods, custom brackets.
- QC documentation: Material certificates (EN 10204 3.1), rope tensile test reports, dimensional inspection, optional third-party inspection.
Product Showcase
Engineering note: Physical barrier performance depends on installation method, supporting structure (posts, frames, cables), wind load and site-specific conditions. Anti-drone rope netting is a physical deterrent, not an electronic countermeasure system. Buyer is responsible for verifying compliance with local regulations regarding counter-UAS installations before purchase. Boni Tech does not represent that this product meets any specific military or law-enforcement performance standard unless explicitly agreed in writing.
Size & Application
Anti-Drone Rope Netting Specifications
All dimensions below can be customized. Values listed are typical production ranges — confirm with our engineering team if your requirement falls outside these limits.
| Parameter | Typical Range |
|---|---|
| Material | AISI 304 / 316 / 316L stainless steel (A2 / A4 grade available) |
| Wire Rope Construction | 7 × 7 or 7 × 19 strand, depending on rope diameter |
| Rope Diameter | 1.2 mm / 1.6 mm / 2.0 mm / 2.4 mm / 3.0 mm (custom up to 4.0 mm) |
| Aperture (Mesh Opening) | 30 × 30 mm – 150 × 150 mm (custom up to 200 mm) |
| Mesh Type | Ferrule (interlaced) / Cross-clamp (pressed) / Knotted |
| Aperture Angle | 60° standard; 90° and custom angles on request |
| Panel Size (W × H) | Up to 3 m × 12 m per single panel; larger panels by splicing |
| Edge Finish | Open ends / welded loops / boundary rope / stainless ferrule edge |
| Surface Finish | Mill (natural silver) / black oxide / hot-dip galvanized (on request) |
| Mounting Hardware | Stainless eyelets, boundary ropes, tension rods, custom brackets |
| Working Temperature | −40 °C to +500 °C (material dependent) |
| Order Quantity | Prototype: 1 panel; production: 10 m²+ typical |
Common Use Cases for Custom Rope Netting
Stainless steel anti-drone rope mesh supplied by Boni Tech is installed as a physical barrier across the following applications. Final configuration must be matched to your project specification and local regulation.
- Airport & Aviation Facility Protection — Perimeter netting around helipads, runway approaches, and terminal airside zones to deter low-altitude drone intrusion.
- Critical Infrastructure Shielding — Physical barrier installation at power stations, refineries, data centers, and water treatment facilities where drone overflight is restricted.
- Public Events & Stadiums — Temporary or permanent anti-drone netting for open-air concerts, sports venues, and political gatherings.
- Correctional Facilities & Borders — Rope mesh integrated into existing perimeter fencing for correctional institutions and border-line installations.
How to order
How to Order Anti-Drone Rope Netting
To receive an accurate and fast quotation, please include the following information in your inquiry. Drawings (PDF, DWG or STEP) are highly preferred — we can quote in 24 hours with a complete specification.
Information to Include in Your Inquiry
- Material & grade: 304 / 316 / 316L stainless steel, or other alloys.
- Wire rope diameter (e.g. 1.6 mm / 2.0 mm / 2.4 mm) and strand construction (7 × 7 or 7 × 19).
- Aperture (mesh opening, mm) and mesh type (ferrule / cross-clamp / knotted).
- Panel size (width × height, m) and total order quantity (m² or pcs).
- Edge finish: open ends / welded loops / boundary rope / ferrule edge.
- Surface finish: natural mill / black oxide / hot-dip galvanized.
- Mounting hardware: eyelets, boundary ropes, tension rods, brackets (or supply your own).
- Service environment: indoor / outdoor, coastal / industrial, wind load zone.
- Destination port and target delivery date.
Video












